Vacuum Chambers :: Modular Vacuum Chambers :: Vacuum Cube Hardware and Accessories

Bolt Kit for Vacuum Cube Plates with CF 10.0" Conflat Port, Twenty-Four Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0".

0.0

CODE:

This hardware kit is specifically for Vacuum Cube plates that have a Conflat 10.0" port with tapped bolt threads. The kit consists of twenty-four (24) silver-plated, 12-point bolts, 5/16-24 x 1.0", and twenty-four (24) stainless steel washers. The 1.0" screws are slightly shorter than the...

$123⁸⁴

In stock

+ −

Bolt Kit For 1.33 In. Conflat Tapped Bolt Hole Flanges and Vacuum Plates, Six Silver-Plated Socket Head Bolts With Washers, 8-32 x 1/2".

0.0

CODE:

These bolt kits contain silver-plated Allen head bolts and washers to fasten tapped hole 1.33 (1-1/3) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange...

$30⁹⁹

In stock

+ −

Bolt Kit For 2.75 In. Conflat Tapped Bolt Hole Flanges and Vacuum Plates, Six Silver-Plated 12-Point Bolts With Washers, 1/4-28 x 7/8".

0.0

CODE:

These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 2.75 (2-3/4) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange...

$33²⁹

In stock

+ −

Bolt Kit for Vacuum Cube Plates with CF 3.375" or 4.5" Conflat Port, Eight Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0".

0.0

CODE:

This hardware kit is specifically for Vacuum Cube plates that have a Conflat 3.375" or 4.5" port with tapped bolt threads. The kit consists of eight (8) silver-plated, 12-point bolts, 5/16-24 x 1.0", and eight (8) stainless steel washers. The 1.0" screws are slightly shorter than the...

$41³⁴

In stock

+ −

Bolt Kit for Vacuum Cube Plates with CF 6.0" Conflat Port, Sixteen Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0".

0.0

CODE:

This hardware kit is specifically for Vacuum Cube plates that have a Conflat 6.0" port with tapped bolt threads. The kit consists of sixteen (16) silver-plated, 12-point bolts, 5/16-24 x 1.0", and sixteen (16) stainless steel washers. The 1.0" screws are slightly shorter than the bolts...

$82⁵⁶

In stock

+ −

Bolt Kit for Vacuum Cube Plates with CF 8.0" Conflat Port, Twenty Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0".

0.0

CODE:

This hardware kit is specifically for Vacuum Cube plates that have a Conflat 8.0" port with tapped bolt threads. The kit consists of twenty (20) silver-plated, 12-point bolts, 5/16-24 x 1.0", and twenty (20) stainless steel washers. The 1.0" screws are slightly shorter than the bolts typically...

$103²⁰

In stock

+ −

Conflat Vacuum Fittings Bakeout Surface Mount K-Type Thermocouple, Response Times < 0.15 Seconds

0.0

CODE:

These self-adhering mount K-Type thermocouples provide a rapid response (less than 0.15 seconds) and can be operated up to temperatures of 260°C (500°F) or can be cemented in place for use at temperatures up to 315°C (600°F). They use a polyimide and fiberglass junction insulation along with a...

$65¹⁴

In stock

+ −

New 90 Degree Angle Bracket for Vacuum Cube Side Mounting Feet and Instruments

0.0

CODE:

These 90 Degree Angle Brackets are used for offsetting mounting points from the bottom of a Vacuum Cube modular vacuum chamber, to the side. Benefits include easier access to bottom plate removal and greater stability. These side mounted brackets should be used with Ideal Vacuum vibration...

$21²³

In stock

+ −

Spare Power Entry Plug, Male C20, For Heater Connection, Vacuum PID Plug & Play Heater Control Systems.

0.0

CODE:

This is a spare C20 power entry plug which connects a heater to the Ideal Vacuum Heater Control System (P107361). Using 12 gauge wire, these power plugs are rated for heater loads of up to 2400W at 120 VAC, and 4800W at 240 VAC. These spare C20 power plugs allow a user to pre-wire an additional...

$19⁹⁹

In stock

+ −

Splitter Kit for Using Dual Heaters with Vacuum PID Plug & Play Heater Control Systems, C19 Male Plug to two C20 Female Connectors

0.0

CODE:

This splitter adapter kit allows two heaters to be connected simultaneously to the Vacuum PID Plug & Play Heater Control System. For systems requiring multiple heaters for better heat distribution, or in multiple locations, this is the solution. The splitter is rated for total heater loads of...

$79⁰⁸

In stock

+ −

USB to RS-485 Cable Adapter with Terminal Block Changer

0.0

CODE:

This cable connects to a USB 1.1 or higher port on a computer and provides a serial com port that can be configured to work with RS-485 devices. When connected to a USB 2.0 port it supports data transfer rates of up to 3 MBaud. No external power supply is needed. This adapter can plug directly...

$98²⁰

In stock

+ −

UV FUSED SILICA Window, AR Coated, 6x6 Vacuum Cube Viewport Plate, 1.5 in. dia., 350-700nm

0.0

CODE:

These fused silica replacement viewports fit our 6x6 1.5" diameter viewport plates, P108316. Lens diameter of 1.5" (38.1mm); glass thickness 0.159" (4.04mm). Type A Coating, Max Bake Temperature: 150°C, Operating Wavelength: 350nm~700nm. Vacuum Cube Introduction...

$358⁶³

In stock

+ −

Vacuum Compatible Vented 1/4-20 x 1/4 Inch Long, Socket Head Cap Screws (SHCS), Chemical Resistant 18-8 Stainless Steel

0.0

CODE:

Our Vacuum 1/4-20 x 1/4 inch long vented socket head cap screws (SHCS) are vacuum compatible and made of chemical resistant 18-8 stainless steel . When used as vacuum fasteners within (inside) an evacuated chamber, typical solid shaft (unvented) screws will trap gas in the void space between the...

$1¹²

Out of stock

Vacuum Compatible Vented 1/4-20 x 3/8 Inch Long, Socket Head Cap Screws (SHCS), Chemical Resistant 18-8 Stainless Steel

0.0

CODE:

Our Vacuum 1/4-20 x 3/8 inch long vented socket head cap screws (SHCS) are vacuum compatible and made of chemical resistant 18-8 stainless steel . When used as vacuum fasteners within (inside) an evacuated chamber, typical solid shaft (unvented) screws will trap gas in the void space between...

$1¹²

Out of stock

Vacuum Compatible Vented 1/4-20 x 5/16 Inch Long, Socket Head Cap Screws (SHCS), Chemical Resistant 18-8 Stainless Steel

0.0

CODE:

Our Vacuum 1/4-20 x 5/16 inch long vented socket head cap screws (SHCS) are vacuum compatible and made of chemical resistant 18-8 stainless steel . When used as vacuum fasteners within (inside) an evacuated chamber, typical solid shaft (unvented) screws will trap gas in the void space between...

$1¹²

Out of stock

Vacuum Cube Chamber Vented Socket Cap Screws 1/2 in. Long x 1/4-20 Stainless Steel, Sold as Each

0.0

CODE:

When used as fasteners within (inside) an evacuated chamber, typical solid shaft (unvented) screws will trap gas in the void space between the screw tip and the bottom of the threaded hole, creating difficult to manage virtual leaks. Our screws have been drilled through the entire length of...

$2⁸⁵

In stock

+ −

Vacuum Cube Chamber Vented Socket Cap Screws 5/8 in. Long x 1/4-20 Stainless Steel, Sold as Each

0.0

CODE:

When used as fasteners within (inside) an evacuated chamber, typical solid shaft (unvented) screws will trap gas in the void space between the screw tip and the bottom of the threaded hole, creating difficult to manage virtual leaks. Our screws have been drilled through the entire length of...

$2⁹⁵

In stock

+ −

Vacuum Cube Cooling Plate Adapter Kit, Connects 2, 12x12 Cooling Plates to 1 Chiller

0.0

CODE:

This cooling plate adapter kit is used to connect 2 Vacuum Cube 12x12 cooling plates to one Thermo Scientific Neslab model Arctic, AC200 A25, AC200 A40, or Accel 500LT cooler. The kit branches the main cooling line off to a secondary cooling plate attached to a second 12x12 Vacuum Cube,...

$840⁹²

In stock

+ −

Vacuum Cube Essential Maintenance and Service Tool Kit

0.0

CODE:

This tool kit has everything you need to assemble, disassemble, maintain, service and repair all Vacuum Cube modular chambers. Includes: 13 pc. Hex key wrench set (inch sizes from 0.050" to 3/8", U.S.A) 7/16" polished combination wrench (for Cube coupling) O-Ring Removal Tool (non...

$34²⁷

In stock

+ −

Vacuum Cube Feet Kit, Supports The Weight of a Complete Cube Assembly, Vibration Mount

0.0

CODE:

These vibration isolation mounting support kits are designed to be used as replacement parts for 6x6x6 vacuum cubes. The rubber support feet are designed to thread into the bottom plate near each of its four corners. The cube plates include tapped threaded holes for access on the outside of...

$11⁴⁴

In stock

+ −

Vacuum Cube Feet Kit, Supports The Weight of a Complete Hexagonal Modular Vacuum Chamber Assembly, Vibration Isolating

0.0

CODE:

These vibration isolation mounting support kits are designed to be used as replacement parts for 6x6x6 hexagonal modular vacuum chambers. The rubber support feet are designed to thread into the bottom plate near each of its six corners. The cube plates include tapped threaded holes for access...

$26⁰¹

In stock

+ −

Vacuum Cube Hardware Kit, Designed For 12x12x12 Cubes, Includes Viton O-rings And Plate Bolts

0.0

CODE:

These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 12x12x12 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the...

$171³⁵

In stock

+ −

Vacuum Cube Hardware Kit, Designed For 6x12x12 Cubes, Includes Viton O-rings And Plate Bolts

0.0

CODE:

These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 6x12x12 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the...

$109²⁵

In stock

+ −

Vacuum Cube Hardware Kit, Designed For 6x6 Hexagonal Frame, Includes Viton O-rings And Bolts

0.0

CODE:

These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 6x6 hexagonal frames. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the...

$71⁷³

In stock

+ −